You bet you can. If you’re the kind of American who loves the sound of a marker firing downrange, the smell of the woods, and the rush of a good paintball firefight—then this one’s for you. Paintball Gun Wraps aren’t just for looks. They’re about pride, performance, and putting your signature on your gear.
At GunWraps, we build rugged, high-quality vinyl wraps for AR-15s, pistols, shotguns, rifles, and more. Every inch of our film is made to last through mud, water, recoil, and sun. And with our Universal Gear Sheets, you can now take that same battle-tested technology and bring it to your paintball setup.
Whether you run scenario games, speedball, or backwoods ambushes with your buddies, wrapping your marker in authentic camouflage gives you an edge—and a look that says you mean business.
Yes, You Can Wrap Your Paintball Gun Using Our Universal Kits
The short answer is yes, you absolutely can wrap your paintball gun using GunWraps vinyl.
Our Universal Gear Skin Sheets are designed for all shapes and sizes of equipment—firearms, crossbows, scopes, knives, paintball markers, and more. The vinyl conforms to curves and contours, giving your marker a tight, professional finish without the mess of paint or the permanence of hydro-dipping.
Utilizing our Universal Gear Sheets as Paintball Gun Skins is the easiest way to change up your look or match your environment—whether that’s dense brush, open desert, or an urban training field.
And unlike spray paint, you can remove or replace your wrap whenever you want. No damage, no residue, no regrets. Our Universal Sheets are available in several sizes. We recommend going with the X-Large (15” x 59”) to ensure you have enough to finish the job with some to spare.
Get an Advantage Over the Competition
Let’s face it—when you’re creeping through the woods during a scenario match, the smallest reflection can give away your position. Glossy black and chrome paintball guns might look cool out of the box, but they stick out like a sore thumb in nature.
A properly applied Paintball Gun Wrap gives you a stealth advantage. Camo tones break up your outline, cut glare, and help you blend into brush or trees. You’ll move quieter, strike faster, and disappear like a ghost.
Plus, you’ll protect your marker from scratches, sun fade, and field grime. Whether you’re diving into bunkers or crawling through mud, your gun will stay looking sharp—and when the match is over, peel it off and it’s good as new underneath.
That’s the kind of tactical edge GunWraps was made for.
No Two Guns Are Alike: The Custom Touch
Every paintball gun is unique—different bodies, hoppers, grips, and attachments. That’s why pre-cut kits don’t cut it. You need flexibility.
That’s where our Universal Gear Sheets come in. You get full control of your design. Cut, stretch, and fit the vinyl wherever you want—on the receiver, barrel, hopper, or stock.
This is DIY camouflage for those who like to do things their way. No cookie-cutter templates. No gimmicks. Just a clean, rugged finish that’s 100% your style.
How to Install
You don’t need a shop or industrial-grade tools to wrap your paintball gun—just patience, a steady hand, and a few essentials.
Here’s a quick guide, and you can check out our full step-by-step instructions in How to Apply Gear Wraps:
Tools You’ll Need
- GunWraps vinyl sheets
- Squeegee and utility knife (Install Tools)
- Heat gun or hair dryer
- Rubbing alcohol and microfiber cloth
Step-by-Step
- Clean Thoroughly: Remove dirt, oil, and residue. Use rubbing alcohol to get a clean surface—especially on grips and barrels.
- Plan Your Layout: Cut your Paintball Gun Skins into manageable sections. You’ll want smaller pieces for curves or details.
- Apply with Pressure: Peel back the liner, line up your vinyl, and use firm, even pressure to apply. Don’t rush it.
- Use Heat to Conform: A little warmth goes a long way. Heat the vinyl as you stretch it over edges and contours—it’ll hug every curve perfectly.
- Trim and Seal: Use your knife to trim any extra vinyl. Then heat it one last time and smooth everything down tight.
You’ll end up with a professional-looking finish that can take a beating and still look sharp.
GunWraps Are 100% Waterproof and Paint-Proof
Our vinyl isn’t your average decal film—it’s outdoor-rated, military-grade stuff. GunWraps are built to handle water, oil, mud, and heat.
That means you can submerge your marker, wipe it down, clean it, and it’ll stay looking fresh. Paint on the vinyl finish isn’t a deal-breaker; a finish ruined. Clean the wrap as you would any other part of the paintball gun, no problem.
We don’t mess around when it comes to quality. Whether it’s a weekend paintball war or a long hunting trip, our wraps hold up where others fail.
We’ve Got Camo for Any Occasion and Environment
Every player has a different battleground—and GunWraps has a pattern for every one of them.
Check out our full lineup of patterns in the Universal Gear Sheets collection. You’ll find:
- Realtree MAX-7 – Perfect for wooded fields and duck blinds.
- Veil Rumba Multi – A modern multi-environment pattern.
- Substrate Saipan – A bold ocean-inspired print great for coastal terrain.
- Digital Desert & A-TACS – For players running tactical or urban setups.
Whatever your field, GunWraps helps you blend in, stand out, and protect your gear—all at the same time.
Final Thoughts
So, can you wrap your paintball gun? Absolutely. And if you’re serious about your gear, you should.
With GunWraps, you’re not just slapping on stickers—you’re outfitting your weapon with the same premium-grade camouflage trusted by shooters, hunters, and tactical pros.
Grab a Universal Gear Sheet, check out the Install Tools, and follow the How to Apply Guide to get started.
Whether it’s for looks, stealth, or protection, our Paintball Gun Wraps deliver. Built tough, made in America, and ready for anything the field throws your way.
FAQ
Q: Can I wrap any paintball gun?
A: Yes. Our Universal Gear Sheets work on any style—speedball, woodsball, or mil-sim markers.
Q: How long will the wrap last?
A: With proper prep and care, you’ll get years of durability, even with heavy use.
Q: Can I remove or replace it?
A: Absolutely. GunWraps vinyl is removable without residue or damage.
Q: Is it waterproof?
A: 100%. GunWraps are made for the outdoors—rain, mud, snow, and everything in between.
Q: Do I need special tools?
A: A squeegee, utility knife, and a heat gun are all you need. You can grab them in our Install Tools section.
