Binocular Gear Wraps
Binocular Skins and Camouflage Vinyl Wraps
Customize your outdoor optics with Binocular Skins from GunWraps. These removable vinyl wraps add camouflage, color, and a protective layer to suitable exterior surfaces without requiring permanent paint, hydro dipping, or refinishing.
Choose from licensed hunting camouflage, tactical designs, classic military-inspired patterns, colorful graphics, and original GunWraps artwork. Whether you use binoculars for hunting, scouting, birdwatching, wildlife observation, sporting events, or range observation, a vinyl skin can give your optics a distinctive new appearance.
Each Binocular Skin includes one wrap kit with detailed installation instructions. The universal, trim-to-fit pieces can be adjusted for many common binocular shapes while leaving lenses, focus wheels, diopter adjustments, hinges, controls, and other functional areas accessible.
What Comes With a Binocular Skin?
Each GunWraps Binocular Skin includes pre-cut vinyl pieces designed to cover suitable exterior areas on one compatible pair of binoculars. The standard kit contains two large sections, with one section intended for each side of the binocular body.
- One complete Binocular Skin kit
- Two main vinyl sections for opposite sides of the binoculars
- Detailed installation instructions
- Universal, trim-to-fit material
- Pressure-activated adhesive for positioning and adjustment
- Waterproof matte, non-glare finish
- Clean removability when properly installed and removed
- Made in the USA
Binoculars, lens covers, neck straps, harnesses, cases, and installation tools are not included. The exact amount of coverage depends on the dimensions, shape, surface texture, controls, and construction of your binoculars.
Which Binoculars Are Compatible?
GunWraps Binocular Skins use flexible, universal material that can be trimmed for many common binocular designs. Because binoculars vary considerably by manufacturer, magnification, objective-lens size, body style, hinge design, armor texture, and control placement, every installation may fit differently.
Compatibility and final coverage can be affected by:
- Compact, mid-size, or full-size binocular dimensions
- Roof-prism or Porro-prism body designs
- Single-hinge or open-bridge construction
- Straight, tapered, rounded, or deeply contoured housings
- Rubber-armored, polymer, metal, or coated exterior surfaces
- Raised logos, lettering, ridges, grips, and textured panels
- Central focus wheels and diopter adjustments
- Tripod-adapter covers and mounting points
- Neck-strap or harness attachment points
- Attached lens caps and protective covers
- Electronic controls on rangefinding or image-stabilized binoculars
Compare the shape and dimensions of your binoculars with the available material before ordering. The universal pieces may require trimming, repositioning, or division into smaller sections. Complete coverage and an identical fit cannot be guaranteed for every binocular model.
Binocular Skins are designed for conventional binocular housings. They should not automatically be assumed to fit monoculars, spotting scopes, night-vision systems, thermal optics, rangefinding equipment, or other devices with substantially different dimensions and controls.
Choose a Binocular Wrap Pattern
The Binocular Skin collection includes the complete range of GunWraps pattern styles. This makes it possible to select practical field camouflage, coordinate your optics with other hunting equipment, or add a bold design that makes your binoculars easier to recognize.
- Hunting camouflage: Choose from Realtree Nature, Realtree XTREME, Realtree XTRA Colors, Prym1, Next Camo, Just Hunt, Nature, and other outdoor patterns.
- Tactical camouflage: Explore Kryptek, A-TACS, A-TACS U|CON, RELV, Veil, Nemesis, Substrate, and Sirphis designs.
- Military-inspired patterns: Compare Vietnam Tiger Stripe, Digital, Classic, Old School Duck, Battle Storm, Ragged, and Erratic camouflage.
- Fishing and water-inspired designs: Browse Realtree Fishing, Realtree Aspect, Realtree WAV3, and other patterns suited to boating, fishing, and shoreline use.
- Bold graphics: Select Skull, Sticker Bomb, Galaxy, Bandana, Animal Print, Paint Splatter, Paintball, Circuit Board, or Tie Dye.
- Textured and material-inspired patterns: Add the appearance of Carbon Fiber, Damascus, Rust, Stone, Shattered Laser, or other printed textures.
Pattern placement may differ from the product images because each binocular body uses a different section of the printed material. Final placement also depends on the dimensions of the optic, alignment, stretching, and trimming performed during installation.
Binocular Skins for Hunting and Outdoor Observation
A camouflage Binocular Skin can help visually coordinate your optics with your hunting clothing, firearm wrap, blind, pack, and other field equipment. Choose woodland, marsh, grassland, snow, open-country, or darker tactical colors based on the terrain and season in which you commonly hunt.
The matte, non-glare finish helps avoid the bright reflective appearance associated with many glossy decorative materials. However, a wrap cannot make binoculars completely invisible. Exposed lenses, controls, logos, uncovered areas, movement, lighting, scent, and viewing conditions can still affect concealment.
Binocular wraps are also useful outside of hunting. Wildlife watchers, birders, hikers, scouts, sports spectators, and range users can choose a pattern that matches their environment or makes their equipment more personally recognizable.
Benefits of Vinyl Binocular Wraps
A Binocular Skin combines removable customization with a durable vinyl layer over compatible covered surfaces.
- Changes the appearance of binoculars without permanent paint or refinishing
- Available in hunting, tactical, licensed, colorful, and graphic patterns
- Helps protect covered areas from minor scratches and scuffs
- Provides an additional barrier against moisture and ordinary handling wear
- Matte, non-reflective finish helps reduce unwanted surface glare
- Pressure-activated adhesive supports positioning and repositioning
- Flexible material conforms around many suitable curves and contours
- Universal pieces can be trimmed for the individual binocular body
- Allows matching optics with a firearm, rangefinder, scope, or other wrapped gear
- Cleanly removable when you want to change the pattern
- Made in the USA
A vinyl skin is not a padded case or impact-protection system. It cannot prevent every scratch, crack, dent, optical issue, or type of weather-related damage. Binoculars should still be handled, transported, cleaned, and stored according to the optic manufacturer’s instructions.
Will a Binocular Skin Affect the Optics?
A properly installed Binocular Skin should cover only compatible exterior housing surfaces. The vinyl must not cover the objective lenses, eyepieces, focus wheel, diopter adjustment, hinge, tripod mount, electronic controls, vents, identification markings, or other functional features.
Do not place vinyl where it could interfere with:
- Focusing or diopter adjustment
- Changing the interpupillary distance
- Twisting or folding adjustable eyecups
- Removing or attaching lens covers
- Operating rangefinding or image-stabilization controls
- Connecting a neck strap, harness, tether, or tripod adapter
- Opening battery compartments or service panels
- Reading serial numbers or required product information
After installation, operate every adjustment and confirm that the binoculars still move and focus normally. Trim or remove any material that causes interference.
Can You Wrap Rubber-Armored Binoculars?
Many binoculars have rubberized armor or textured grip surfaces. Vinyl adhesion can vary on these materials because some rubber, silicone, soft-touch coatings, and heavily textured surfaces resist adhesives.
Before completing the installation, test a small section in an inconspicuous compatible area. The surface should be clean, dry, smooth enough for adhesion, and free from oils, protectants, silicone treatments, or degrading rubber.
Do not apply the wrap over loose, cracked, peeling, deteriorated, or sticky exterior armor. Removing vinyl from a damaged or aging coating could lift additional material. Follow the binocular manufacturer’s care instructions whenever you are uncertain about the exterior finish.
How to Install a Binocular Skin
Begin by reading the instructions included with the kit and examining the two main vinyl sections. Plan the placement before removing the complete material from its backing.
- Remove the neck strap, harness, detachable lens covers, and other accessories when appropriate.
- Inspect the binocular housing and identify the lenses, focus controls, hinges, adjustments, attachment points, and other areas that must remain uncovered.
- Clean suitable exterior surfaces thoroughly to remove dirt, fingerprints, oil, dust, and residue.
- Use isopropyl alcohol on compatible surfaces to remove remaining residue, then allow the binoculars to dry completely.
- Review the two large vinyl sections included in the kit and determine which piece will cover each side.
- Place the binoculars over the backing sheet to estimate the required material.
- Trim away clearly unnecessary material while leaving approximately one inch of additional vinyl for positioning and complete coverage.
- Use the V-shaped notch in the piece to help locate the center and align the material with one side of the binocular body.
- Apply the vinyl gradually with firm pressure, working it across suitable surfaces.
- Use controlled heat when necessary to help the material conform around compatible curves and contours.
- Lift and reposition the vinyl if bubbles or wrinkles develop, then use a short application of controlled heat before reapplying it.
- Allow the material to cool before carefully trimming the excess.
- Apply final controlled heat and firm pressure across all wrapped surfaces and finished edges.
- Repeat the positioning, application, heating, and trimming process on the opposite side.
- Confirm that every lens, focus control, hinge, adjustment, and attachment point remains fully functional.
A wrap glove or suitable squeegee can help apply even pressure and reduce bubbles or wrinkles. Avoid excessive heat, especially near lenses, seals, electronics, rubber armor, adhesives, or sensitive optical components.
Read the complete Binocular Skin installation guide before beginning.
How to Care for Wrapped Binoculars
After installation, allow the vinyl to cool and bond before exposing the binoculars to demanding outdoor conditions. Regularly inspect the edges, especially around frequently handled areas, attachment points, and curved surfaces.
- Wipe the wrapped housing with a soft, damp cloth when cleaning is necessary.
- Avoid harsh solvents, abrasive cleaners, and stiff brushes on the vinyl.
- Clean the lenses only with products and methods approved by the binocular manufacturer.
- Do not direct excessive heat toward the wrap, lenses, seals, or body.
- Allow wet binoculars to dry before placing them in a closed case.
- Inspect lifting edges before attaching a tight-fitting harness or protective cover.
- Store the binoculars according to the optic manufacturer’s recommendations.
Exposure to frequent friction, harsh chemicals, extreme conditions, and repeated handling can shorten the wrap’s service life. Damaged or lifting material should be trimmed, secured when appropriate, or replaced before it interferes with normal use.
Match Your Binoculars to Other Outdoor Gear
Many GunWraps patterns are available for binoculars, rangefinders, scopes, knives, Thermacell devices, firearm kits, magazine skins, and universal sheets. Selecting the same design across several products can create a coordinated setup for hunting, range use, or outdoor travel.
You can match a camouflage Binocular Skin with a rifle or shotgun wrap, coordinate it with a rangefinder and scope, or use a contrasting pattern to make the binoculars easier to distinguish from other equipment.
Matching products use the same selected pattern, but exact artwork placement may vary between different gear types. Each product displays a different section of the artwork based on its size, shape, alignment, and final trimming.
How Much Do Binocular Skins Cost?
GunWraps Binocular Skins are currently priced at $24 and include one binocular wrap kit with detailed installation instructions.
Prices, patterns, colors, and availability may change. Review the individual product page for current pricing, available design options, included material, and product specifications.
Frequently Asked Questions
Q: What comes with a Binocular Skin?
A: Each kit includes pre-cut vinyl material for one compatible pair of binoculars and detailed installation instructions. The standard kit contains two main sections, with one intended for each side.
Q: Are binoculars included with the wrap?
A: No. The product includes the vinyl skin and instructions only. Binoculars, straps, harnesses, cases, lens covers, and installation tools are not included.
Q: Will a Binocular Skin fit every model?
A: The universal material can be trimmed for many common binocular shapes, but dimensions, contours, armor, hinges, and control placement vary. Complete coverage cannot be guaranteed for every model.
Q: Can I install a binocular wrap myself?
A: Yes. Binocular Skins are designed for DIY installation using thorough cleaning, careful alignment, firm pressure, controlled heat, and trimming.
Q: Can the wrap cover rubber-armored binoculars?
A: It may adhere to some compatible rubberized surfaces, but adhesion varies. Soft-touch coatings, silicone, heavy textures, residue, and deteriorating rubber can prevent a secure bond. Test a small compatible area before completing the application.
Q: Will the wrap interfere with focusing?
A: Proper installation should leave the focus wheel, diopter adjustment, hinge, eyecups, lenses, and other functional areas uncovered. Test every adjustment after installation and trim any vinyl that causes interference.
Q: Can I use a Binocular Skin on rangefinding binoculars?
A: It may be possible when the exterior housing is compatible, but the material must be trimmed away from buttons, sensors, battery compartments, displays, emitters, receivers, and other electronic or optical components.
Q: Does the wrap protect the lenses?
A: No. The vinyl is applied only to suitable exterior housing surfaces. It does not cover or protect the objective lenses or eyepieces. Use appropriate lens caps and a protective case when needed.
Q: Is the material waterproof?
A: The vinyl has a waterproof finish, but applying it does not make the binoculars waterproof. The optic’s weather resistance remains limited to the manufacturer’s original rating and condition.
Q: Does a Binocular Skin reduce glare?
A: The standard matte, non-glare finish can reduce reflections from covered exterior surfaces compared with a glossy decorative finish. It cannot eliminate glare from lenses or uncovered components.
Q: Can I match the wrap to my rifle, shotgun, or hunting gear?
A: Yes. Many patterns are available across firearm wraps, scopes, rangefinders, knives, Thermacell devices, and universal sheets. Exact artwork placement may vary between products.
Q: Are Binocular Skins removable?
A: Yes. The vinyl can be carefully removed when you want to replace worn material, choose another design, or return the binoculars to their previous appearance. Removal results can depend on the age and condition of the binoculars’ exterior coating.
Q: Are GunWraps Binocular Skins made in the USA?
A: Yes. GunWraps Binocular Skins are made in the USA.
Shop Binocular Skins
Browse GunWraps Binocular Skins to compare hunting camouflage, tactical, military-inspired, fishing, wildlife, colorful, textured, and original patterns. Select a design to view its current color options, price, material specifications, and included installation instructions.
